Follow this step:
- Step 1
Compare the band rating on the wireless routers. The devices are typically labeled as dual-band 5Ghz routers or single-band 2.4Ghz routers. The latter cost less and are sufficient for most areas except for Wi-Fi saturated areas (like city high rises) where you'll want dual-band devices for the best reception, according to CNET.
- Step 2
Check the routing technology. Most routers either have the current 802.11n standard or the older 802.11g standard. N-models provide browsing speeds up to five times faster than G-models, according to Consumer Search, and are the best choice if you want optimal Internet surfing speed.
- Step 3
Inspect the connector ports on the router. The router will have at least one
Ethernet cable for connecting to your broadband modem, and often has several extra Ethernet ports in case you want to physically connect a computer or device instead of using its wireless signal. Choose a router that has enough extra ports to connect your devices should the wireless signal malfunction. - Step 4
Review the range of the wireless router. The greater the range, the further you can be from the router and still obtain a wireless Internet signal. Manufacturers typically list the range in terms of feet on the router's box or label.
- Step 5
Review the wireless security available on the router. This keeps hackers and unscrupulous neighbors from using your Internet connection. Consumer Reports magazine recommends Wi-Fi Protected Access 2 (WPA2) security standards for the best security, or Wired Equivalent Privacy (WEP) at the very minimum. This information is always listed on the product's box or label.
0 comments:
Post a Comment
Note: only a member of this blog may post a comment.